
Description
Description
The Narvi B-2003 is a weekly-programmable control centre for 9–15 kW electric sauna heaters on a 400V 3N~ supply, designed for commercial and public saunas. Its weekly clock holds seven memory slots, each storing a start time, stop time and day, so a busy sauna can run to a set schedule without daily attention. The control unit and power card share a single enclosure, the temperature sensor is external, and the unit is installed outside the sauna room at up to 20 metres from the heater. A lighting switch on the panel controls sauna lights of up to 100 W. For a simpler daily timer on the same heaters, see the Narvi T-2003 control unit.
Features
Technical Specification
| Suitable heater output | 9–15 kW (15 kW maximum) |
| Electrical connection | 400V 3N~ |
| Dimensions (H × W × D) | 215 × 205 × 80 mm |
| Temperature adjustment range | 40–115°C, in 1°C steps |
| Temperature display range | 20–125°C |
| Pre-selection timer | Up to 24 h, in 30-minute steps (1-minute steps under 1 h) |
| Weekly clock | 7 programmable memory slots (start, stop and day for each) |
| Maximum switching-on time | 4, 6 or 12 h, set by the installer (12 h for public saunas only) |
| Lighting output | Max 100 W |
| Temperature sensor | External thermostat included |
| Maximum distance from heater | 20 m |
| Mounting | Surface-mounted outside the sauna room; not suitable for flush mounting |
Installation
The control centre must be installed outside the sauna room, surface-mounted and fixed to the wall with three screws, with the external sensor box installed inside the sauna as shown in the manual. The weekly clock automatically rejects programmes that run longer than 12 hours or leave less than 6 hours between sessions. The maximum switching-on time is set by the installer using the DIP switches inside the enclosure. Electrical installation must be carried out by a certified electrician, following the installation manual and local wiring regulations.
Brand
Narvi is a Finnish manufacturer of sauna heaters and control equipment, based in Lappi, Finland. Narvi equipment is CE tested and carries the Finnish Key Flag as a mark of genuine Finnish design and manufacture.
Ordering note
Check your heater model, its rated output and, where relevant, the controller generation before ordering. Electrical installation and replacement of control equipment must be carried out by a certified electrician.
Delivery & Returns
Delivery
We offer fast and reliable delivery to customers across the UK and beyond. For full details on shipping times and costs, please review our delivery policy.
Returns
We offer hassle-free returns within 30 days of purchase, so you can shop with complete confidence. For details, see our returns policy.
Warranty & Quality Promise
We are committed to delivering products of the highest quality, for details surrounding warranty please contact us.
Description
The Narvi B-2003 is a weekly-programmable control centre for 9–15 kW electric sauna heaters on a 400V 3N~ supply, designed for commercial and public saunas. Its weekly clock holds seven memory slots, each storing a start time, stop time and day, so a busy sauna can run to a set schedule without daily attention. The control unit and power card share a single enclosure, the temperature sensor is external, and the unit is installed outside the sauna room at up to 20 metres from the heater. A lighting switch on the panel controls sauna lights of up to 100 W. For a simpler daily timer on the same heaters, see the Narvi T-2003 control unit.
Features
| Suitable heater output | 9–15 kW (15 kW maximum) |
| Electrical connection | 400V 3N~ |
| Dimensions (H × W × D) | 215 × 205 × 80 mm |
| Temperature adjustment range | 40–115°C, in 1°C steps |
| Temperature display range | 20–125°C |
| Pre-selection timer | Up to 24 h, in 30-minute steps (1-minute steps under 1 h) |
| Weekly clock | 7 programmable memory slots (start, stop and day for each) |
| Maximum switching-on time | 4, 6 or 12 h, set by the installer (12 h for public saunas only) |
| Lighting output | Max 100 W |
| Temperature sensor | External thermostat included |
| Maximum distance from heater | 20 m |
| Mounting | Surface-mounted outside the sauna room; not suitable for flush mounting |
Installation
The control centre must be installed outside the sauna room, surface-mounted and fixed to the wall with three screws, with the external sensor box installed inside the sauna as shown in the manual. The weekly clock automatically rejects programmes that run longer than 12 hours or leave less than 6 hours between sessions. The maximum switching-on time is set by the installer using the DIP switches inside the enclosure. Electrical installation must be carried out by a certified electrician, following the installation manual and local wiring regulations.
Brand
Narvi is a Finnish manufacturer of sauna heaters and control equipment, based in Lappi, Finland. Narvi equipment is CE tested and carries the Finnish Key Flag as a mark of genuine Finnish design and manufacture.
Ordering note
Check your heater model, its rated output and, where relevant, the controller generation before ordering. Electrical installation and replacement of control equipment must be carried out by a certified electrician.
Delivery
We offer fast and reliable delivery to customers across the UK and beyond. For full details on shipping times and costs, please review our delivery policy.
Returns
We offer hassle-free returns within 30 days of purchase, so you can shop with complete confidence. For details, see our returns policy.
Warranty & Quality Promise
We are committed to delivering products of the highest quality, for details surrounding warranty please contact us.









